Telephone: 
01621 785578
Fax: 01621 785588

As well as the comprehensive range of stainless steel sheet, Speed Alloys also holds complementary stocks of other products.

Aluminium Sheet

Aluminium sheet is stocked in grades

1050 H14 (previously SIC-H4)
5251 H22 (previously NS4 H3)

Other grades and sizes are available, but may not be in stock.

All sheets can plastic coated either on one or both surfaces and can also be satin or brush polished if required.

Aluminium can be cut to size or fabricated as required. Please see our fabrication page.

Stainless Steel Square and Rectangular Section

Box section is stocked in a range of sizes starting at 20mm x 20mm to 150mm x 100mm.

Material is supplied in 6 metre random lengths and normally has a 220/240 grit finish on the outer faces.

Most stock is held in grade 1.4301 (304) with 1.4404 (316) being available on request.

Stainless Steel Tube

Stainless steel ornamental tube is stocked in 6 metre lengths and is normally supplied with a bright polished finish. Material is stocked in grades 1.4301 (304) and 1.4404 (316).

There is a limited selection of seamless tube and nominal bore pipe but non stock items are often available on a short delivery.

Grade Selector

Stainless Steel Rod

Stainless steel rod is stocked in both metric and imperial sizes in 3000 mm random lengths. The size range starts at 3mm dia. and extends to 300mm dia. Material is supplied in grades

1.4305 (303)    1.4301 (304)   1.4404 (316)

Other sizes and grades are available within a short delivery. Stainless steel hexagon is also available.

Stainless Steel Flat bar and Square Bar

Flat bar is supplied in 4000mm random lengths and is most commonly supplied in the slit and edge rolled condition.

The grades available are

1.4301 (304)         1.4404 (316)

The size range starts at 10mm x 4mm and extends to 200mm x 50mm

We can apply a satin or brushed finish to any or all faces, and in most cases this operation will only take a few days.

Grade Selector

Stainless Steel Angle

Angle is supplied in 6000mm random lengths.

The grades available are

1.4301 (304)        1.4404 (316)

The size range starts at 20mm x 20mm x 3mm and extends to 150mm x 150mm x 10mm.

We can apply a satin or brushed finish to the outside faces using our own in house equipment and in most cases this operation will only take a few days.

Press-formed angle is also available and is priced on request.

Stainless Steel Billets

Using a range of bar saws we are able to supply stainless billets on bar items up to 300mm dia., using the same equipment we can also cut to lengths various other products including stainless steel and aluminium angle, flat bar, square bar, tube and box section.

Other Products

The Speed Alloys have a number of contacts for many items and is able to source supplies for the following products:

• Stainless Steel Mesh
• Stainless Steel and Aluminium perforated sheet
• Stainless Steel and Aluminium patterned sheet and floor plate
• Stainless Steel Fittings
• Stainless Steel sawn, plasma cut, sheared and guillotined plate
• Stainless Steel and aluminium strip in coil
• Aluminium cut plate and billets
• Aluminium extruded products: bars, angles, tubes etc
• Brass, copper and bronze sheet, plate bar etc
• Titanium and Nickel Alloys

For all enquiries you can telephone 01621 785578
fax 01621 785588
email : sales@speedalloys.com

or complete our online enquiry form

If you are interested in any products that we have not listed, we may still be able to source these items using our extensive contacts throughout the industry.

We accept the following credit cards:

QUICK LINKS
Enquiry Form |Products Main Page | Polishing
Weld-free Handrails| Fabrication Services | Home